All Products

Description This kit suits the MoTeC M190 ECU. The kit includes all 3 connector kits required to wire to a MoTeC M190 ECU. • MS AS616-26SN • MS AS616-35SN • MS AS616-35SA Please Contact Us for further information.

Description Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description The layout of each keypad is completely user-definable, so a standard set of 64 semi-transparent labels is available for users to affix to the backlit buttons as they choose. Please Contact Us for further information.

Description This kit suits the MoTeC PDM16 and PDM16 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description This kit suits the MoTeC PDM32 and PDM32 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 7 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 8 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 12 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 22 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 24 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 23 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description The L180 Enclosed Logger is a powerful control device and fully programmable data logger all in one compact unit. It comes standard with 250 MB internal memory and can be upgraded to USB Logging for additional data capacity and flexibility. The USB Logging...

The MoTeC L120 is a cost effective solution serving as a multi purpose solution with internal and USB logging already enabled - acting as a D Series Display Controller, as well as a CAN bus bridge. Additionally, these units have the ability to be...

The MoTeC L120 is a cost effective solution as a D Series Display Controller, as well as a CAN bus bridge. Additionally, these units have the ability to be upgraded with features such as a being used as a T2 Telemetry Box, or the...

Description Documentation • Engine vibration measurements • Measurement range 3 to 25 kHz • Robust design • Integrated series connector This sensor is used for detecting structural born vibrations in spark ignition engines due to uncontrolled combustion. This sensor is suitable for operation in...

Replacement IMU for Bosch M5 ABS systems with 500kb/s CAN speed. This sensor is for ABS system only. MM510 sensors for general applications can be found here:ACCELERATION SENSOR MM5.10

Replacement IMU for Bosch M5 ABS systems with 1mb/s CAN speed. This sensor is for ABS system only. MM510 sensors for general applications can be found here: ACCELERATION SENSOR MM5.10

This sensor is designed to measure temperatures up to 300°C of oil, water, fuel or air. This signal is used as a control value for engine control units or as a measurement value which is logged in a data acquisition system. The NTC-sensing element...

Direct mount knock sensor. Uses a M8 Bold and LK2 connector