Racing Electronics

The X2 Driver ID Club Kit unit keeps track of who is driving during endurance races. Teams are able to switch drivers on the display, with a LED number displays driver ID. The Driver ID Club Kit works for both the X2 Direct Power...

The IMSA required mounting plate for the X2 Pro Transponder.

Unterminated CAN Interface Cable for Video VBOX and VBOX Video HD2. Allows for bare wire connection to the CAN High and CAN Low wires in a vehicle's wiring loom. VBOX's CAN database files can be downloaded from here. Blue Wire: CAN HighWhite Wire: CAN Low

This Ethernet communication cable can be used to download all Bosch dash, logger and MS6 or later ECU’s. This is not for communicating with any ABS systems. For ABS systems a MSA-2 Cable is required which can be purchased here.  A rugged mil spec...

MYLAPS TR2 Transponder - Just released from MYLAPS, and replacing the X2 Direct Power Transponder, the TR2 Transponder is one of the most state of the art transponders on the market. Used in all levels of motorsport such as SCCA, NASA, SRO; as well...

Description Specifications Performance • 10 Hz update rate • 66 satellite channels • Dynamics 4 G • Power supply voltage 4.0 - 6.0 V Communications • RS232 • 38400 Baud rate Compatible with • MoTeC C125, C185 • MoTeC ACL • MoTeC ADL3, ADL2 (not compatible with original...

VBOX Motorsport VBOX HD2 Video Track Package Synchronized HD video, GPS, and CAN data in one system that shows you exactly why one lap was quicker than the next. Built for Serious Driver Development Fast drivers don't improve by looking at lap times alone....

This MYLAPS X2 Pro transponder is for teams participating in the IMSA racing championships. It features a custom firmware that is specific to IMSA competition. The MYLAPS X2 Pro Transponder Plus is the most advanced timing and data system for professional racing series. The newest...

Depending on the interior of your race car, you may require an extension to obtain the desired view for your VBOX Motorsport HD2 Cameras. Typically, it is the forward facing camera that records the track view. The 100mm (3.9") aluminum extension is the perfect...

The MYLAPS X2 Pro Transponder Plus is the most advanced timing and data system for professional racing series. The newest feature that the X2 Pro has, is 2-way communication, enabling transmission of messages and status information both from and to the racer opening up...

This is the adapter cable for the Bosch Rugged USB Flash Drive allowing it to be connected to a PC USB 2.0 Port.

This ADR ONLY suits FIA required series' (SRO). This does NOT work in IMSA. Features Configurable thresholds to trigger an event - password-protected feature Configurable thresholds to trigger the medical light output - password-protected feature Support for external medical and status lights CAN and GPS inputs...

This harness bar mount for 1 5/8" (41.275 mm) roll cages is compatible with both HDMI and non-HDMI VBOX Video HD2 systems. Assembly instructions here. Unit on picture not included.

VBOX Motorsport VBOX Motorsport Pit Lane Timer Takes the guesswork out of pit stops, timing the pit lane speed limit and telling the driver exactly when it's time to go. The VBOX Motorsport Pit Lane Timer recognizes a preset pit lane entry point as...

This heavy-duty aluminum camera clamp is designed for the VBOX Video HD2 camera. Using two M3 hex screws and a rubber liner for extra protection, this upgraded clamp prevents the camera from moving from its desired position over time with on-track use and ensures...

With the quick-release catches, this mounting bracket allows the VBOX Video HD2 to be both quickly secured and easily removed from the car. Please note, you will need to fabricate a back plate (made out of metal or plastic) with four M4 bolts (or...

Replacement antenna for GT cars that mounts on the inside of the windscreen

Description MoTeC UTC - USB to CAN adapter (includes USB cable) Software Requirements for UTC Compatibility • M400, M600, M800, M880 - V2.30S or later • M84 • PDM16, PDM32, PDM15, PDM30 - V1.0 or later • BR2 - V1.0.6.2 (this software ships with...

USB flash drive adaptor cable (1 m) to allow logging to a USB flash drive instead of the SD card. This adaptor cable plugs in to the USB port of a VBOX Video HD2 or Video VBOX Pro.For reliable performance, we recommend using Class...

HD2 mono microphone with LEMO plug, available in either 2.5m or 5m configurations.

This CAN cable is required if logging from a CAN bus and you want to integrate the OLED Predictive Lap Timer Display. 

This cooling fan can be attached to your VBOX HD2 unit if your cabin/cockpit temperatures exceed 50°C (122°F). The cooling fan clips onto the HD2 recording unit's case fins and keeps the enclosure at a lower temperature. The fan plugs into the 'POWER' socket,...

The MYLAPS Transponder Tester allows teams to test the functionality of the transponder. Holding the transponder tester over the X2 or TR2 transponder - the tester will vibrate if the transponder is transmitting a good signal.