Products

11mm Valve Stem. Includes valve stem and mounting hardware. Gaskets are replaceable.

Description Features The CAN Keypad CK-M12 allows for simplification of the dashboard by offering 12 buttons and 9 additional wired inputs to be evaluated and transmitted via CAN bus to other devices on the bus. Each button has an individually addressable LED indicating ring...

The 12 position miniaturized rotary switch is designed and customized for motorsport applications (like steering wheels and central panels). Coming pre-assembled with a resistor divider mounted on a micro PCB, it also features locking pins to adjust and lock positions between 2-12, and a...

- 12-position ABS Map switch for all Bosch ABS Systems- With Deutsch AS connector- For use in M4 and M5 ABS kitsBosch Part Number: F02U V00 111-05

Description Features • Small, lightweight & compact package • Rugged design for use in extreme environments • Backlit customize graphical symbols available • Real time feedback via LED indicators above each button • Simplify wiring, only 4 wires required for multiple buttons • Short...

Valve Stem for Motorcycle TPMS sensors. 16mm OD

Connector and pins to make your own wiring harness for various models of Motec ECU's. These are for the 26 way connectors on the M800/600/400 , M84, and Connector D on M1 Series ECUs.Backshells are used to provide a better surface to grip shrink boots...

Connector and pins to make your own wiring harness for various models of Motec M1 ECU Connector "B" Backshells are used to provide a better surface to grip shrink boots when creating your own wiring looms.  Raychem 202K153 (straight) or 222K153 (90 degree) boots are what...

The rugged 2 GB USB flash drive is securely mounted within a rugged brass housing designed to provide full protection against extreme environmental conditions. It is IP68 protected and resistant to extreme operating temperatures (-30 to 85°C). The USB flash drive is equipped with...

Connector and pins to make your own wiring harness for your CDL3, C125, C127, C1212 Color Display as well as other M800/600/400 and M84 ECU Family, as well as Connector C on M1 Series ECU'sBackshells are used to provide a better surface to grip shrink...

Connector and pins to make your own wiring harness for Motec M1 Series ECU's Connector "A"Backshells are used to provide a better surface to grip shrink boots when creating your own wiring looms.  Raychem 202K163 (straight) or 222K163 (90 degree) boots are what fit the...

This module will convert four analog signals into CAN bus. It can be used with sensors such as the IR200 and IR1000 infrared temperature sensors used to measure brake temperature and tire temperature.Click HERE to view the data sheet for technical specs and information.

Description Features • Small, lightweight & compact package • Rugged design for use in extreme environments • Backlit customize graphical symbols available • Real time feedback via LED indicators above each button • Simplify wiring, only 4 wires required for multiple buttons • Short...

The CMS retractile cable (also known as the motorsport curly cord) is the benchmark item for steering wheel and other applications where the quality and durability of the cable is an absolute must. These cable are hand laid, then double jacketed and feature Raychem DR25...