CATEGORIES
Clear all
553 products
Filter and sort Filter
Filter and sort
Filter
Refined by: Clear all

553 results

CATEGORIES
Clear all
View as
Items per page
24
Sort by:
Date, new to old

All Products

  • C12X Display Creator Enable Code Main image
    MoTeC
    Pre-order
    C12X Display Creator Enable Code
    MoTeC is very excited to announce the release of our new Display Creator software. Display Creator is a unique graphics application for customizing screen designs on MoTeC’s color displays and loggers, namely the D series and C series. This incredibly flexible software allows customers...
    $500.00
    $500.00
  • C12X I/O Enable Code Main image
    MoTeC
    Pre-order
    C12X I/O Enable Code
    This code enables activates the C125, C127 or C1212 inputs and outputs. It allows the ability to: • Wire sensors into the C125/C127. • Use 2 digital and 3 speed inputs. • Use 4 auxiliary outputs. Unfortunately, we are unable to issue codes to...
    $400.00
    $400.00
  • C12X Pro Analysis Enable Code Main image
    MoTeC
    Pre-order
    C12X Pro Analysis Enable Code
    This code enables access to advanced i2 Pro data analysis software with multiple graph overlays, X-Y plots, advanced maths functions, synchronized video (automatic alignment), and flexible layouts to accommodate virtually any user preference. Unfortunately, we are unable to issue codes to international customers due...
    $800.00
    $800.00
  • C12X Logging Enable Code Main image
    MoTeC
    Pre-order
    C12X Logging Enable Code
    This code enables the 120MB of logging memory in the C125, C127 or C1212 display turning it from a display to a display logger. Unfortunately, we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer...
    $530.00
    $530.00
  • Serial to CAN (STC) Main image
    MoTeC
    Sold out
    Serial to CAN (STC)
    Description Documentation The STC (Serial to CAN) adaptor converts RS232 data to CAN and vice versa allowing multiple RS232 devices to be connected to a Data Logger via CAN. Please Contact Us for further information. Documents Title Type 🗎 Datasheet PDF
    $245.00
    $245.00
  • Pro-Level 32GB USB 3.0 Autosport Data Plug Main image
    MoTeC
    Sold out
    Pro-Level 32GB USB 3.0 Autosport Data Plug
    Description • Professional grade, military spec - built for maximum data integrity • Internal USB 3.0 memory stick • Mechanically latched with a keyway that easily locates into the mating connector - ideal for fast changeovers in locations that are difficult to see or...
    $335.50
    $335.50
  • PCI Cable, 2m Main image
    MoTeC
    Sold out
    PCI Cable, 2m
    Description Connecting to the PC's Serial Port Use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM). The PCI cable contains electronics in the ECU end of the cable to convert the ECU signals to signals compatible with the serial...
    $223.00
    $223.00
  • BTX Beacon Transmitter Main image
    MoTeC
    Sold out
    BTX Beacon Transmitter
    Description Documentation Specifications Outputs • Coded infra-red beam Range up to 40 meters (130 ft) when used with BR2 • 3 color LED status indicator for: Power OK Low battery Fault or very low battery Power • External via a 12 V rechargeble battery...
    $815.00
    $815.00
  • BR2 Beacon Receiver Main image
    MoTeC
    Sold out
    BR2 Beacon Receiver
    Description Documentation Specifications Outputs • LED Indicating Power on Beacon signal received Error codes • Digital output for beacon information (alternative to CAN output) Communications • CAN bus used for: Communicating beacon information Communicating diagnostic information Configuring the receiver via the BR2 configuration software...
    $714.00
    $714.00
  • Mid-Level 32GB USB 3.0 Data Plug Main image
    MoTeC
    Sold out
    Mid-Level 32GB USB 3.0 Data Plug
    Description • Internal USB3 memory stick • Mechanically latched • Anodized housing • Resistant to water, vibration, and the elements This cable only fits the standard USB cable offered here. Please Contact Us for further information.
    $160.00
    $160.00
  • M190 Connector Kit Main image
    MoTeC
    Sold out
    M190 Connector Kit
    Description This kit suits the MoTeC M190 ECU. The kit includes all 3 connector kits required to wire to a MoTeC M190 ECU. • MS AS616-26SN • MS AS616-35SN • MS AS616-35SA Please Contact Us for further information.
    $459.00
    $459.00
  • GPS-L5 Main image
    MoTeC
    In Stock
    GPS-L5
    Description Specifications Performance • 5 Hz update rate • 66 satellite channels • Dynamics 4 G • Power supply voltage 4.0 - 6.0 V Communications • RS232 • 19200 Baud rate Compatible with • MoTeC C125, C185 • MoTeC 'Hundred Series' ECUs - M400, M600, M800, M880...
    $195.00
    $195.00
  • GPS-L10 Main image
    MoTeC
    In Stock
    GPS-L10
    Description Specifications Performance • 10 Hz update rate • 66 satellite channels • Dynamics 4 G • Power supply voltage 4.0 - 6.0 V Communications • RS232 • 38400 Baud rate Compatible with • MoTeC C125, C185 • MoTeC ACL • MoTeC ADL3, ADL2 (not compatible with original...
    $210.00
    $210.00
  • Dual Half Bridge Main image
    MoTeC
    Sold out
    Dual Half Bridge
    Description Documentation Specifications Electrical • Output current Continuous DC current 20 A (total) Peak surge current 500 A • Max. operating frequency 50 kHz @ 28 V • Switching delay, typical High to low 6.5 µsec Low to high 6.5 µsec • Input threshold,...
    $482.00
    $482.00
  • DMC-D Converter: Wheel Speed Main image
    MoTeC
    Sold out
    DMC-D Converter: Wheel Speed
    Description Documentation This version is intended for magnetic wheel speed sensors. The signal should be symmetrical around zero volts. Heavy filtering minimizes the possibility of interference, resulting in significant variation of the trigger level with frequency. The Dual Magnetic Converter (DMC) converts magnetic style...
    $116.00
    $116.00
  • DMC-C Converter: Ignition System Main image
    MoTeC
    Sold out
    DMC-C Converter: Ignition System
    Description Documentation This version is intended for ignition system input conditioners, typically used in drag racing, for measuring ignition timing. The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor...
    $116.00
    $116.00
  • DMC-B Converter: Engine Trigger Sensor Main image
    MoTeC
    Sold out
    DMC-B Converter: Engine Trigger Sensor
    Description Documentation This version is intended for engine trigger sensors that have insufficient amplitude to trigger a logic level input. Minimal filtering avoids delays in the signal. The trigger level does not vary significantly at normal operating frequencies. The Dual Magnetic Converter (DMC) converts...
    $116.00
    $116.00
  • DMC-A Converter: Fuel Flow Sensor Main image
    MoTeC
    Sold out
    DMC-A Converter: Fuel Flow Sensor
    Description Documentation This version is intended for fuel flow sensors which have a very low trigger level. Heavy filtering minimizes the possibility of interference, resulting in significant variation of the trigger level with frequency. The Dual Magnetic Converter (DMC) converts magnetic style signals to...
    $116.00
    $116.00
  • CIM Module Main image
    MoTeC
    Sold out
    CIM Module
    Description Documentation Applicable MoTeC products • M4 with serial number less than 3000 • M48 • M8 The CIM module is normally installed in the vehicle. This places the electronics in the vehicle rather than in the cable which has the advantage of providing...
    $175.00
    $175.00
  • Boost Control Solenoid Main image
    MoTeC
    Sold out
    Boost Control Solenoid
    Description Documentation Properly control boost with this solenoid connected to your ECU. Please Contact Us for further information. Documents Title Type 🗎 Datasheet PDF
    $70.00
    $70.00
  • Lambda to CAN (LTC) Main image
    MoTeC
    In Stock
    Lambda to CAN (LTC)
    Description Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
    $465.00
    $465.00
  • Lambda to CAN (LTC-NTK) Main image
    MoTeC
    Sold out
    Lambda to CAN (LTC-NTK)
    Description Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
    $395.00
    $395.00
  • Lambda to CAN (LTCD) Main image
    MoTeC
    Sold out
    Lambda to CAN (LTCD)
    Description Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
    $595.00
    $595.00
  • Lambda to CAN (LTCD-NTK) Main image
    MoTeC
    Sold out
    Lambda to CAN (LTCD-NTK)
    Description Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
    $595.00
    $595.00