Bosch Motorsport Electronics

Description Documentation • Wide measurement range: -40 to 130°C • Robust design This sensor is designed to measure fluid temperatures e.g. oil, water or fuel. This signal may be used as a control value for engine control units or as a measurement value which...

Bosch Motorsport IMU Sensor MM5.10 A 5 degree-of-freedom inertial measurement unit combining three linear accelerometers and two rotational rate sensors in one compact housing, streaming vehicle dynamics data over a 1 Mbaud CAN bus. Overview What Is It Five channels of vehicle dynamics data...

Replacement IMU for Bosch M5 ABS systems with 1mb/s CAN speed. This sensor is for ABS system only. MM510 sensors for general applications can be found here: ACCELERATION SENSOR MM5.10

Description Documentation • 2-axis rotation rate (yaw rate, roll rate) • 3-axis accelerometer (X, Y, Z) • 1 Mbaud or 500 kBaud CAN-output • Aluminum housing • Integrated motorsport connector The MM5.10-R was designed to measure the physical effects of rotational and linear acceleration....

Description Documentation • Absolute fluid pressure measurement • Measurement range 0 to 10 bar • Analog output This sensor is designed to measure absolute pressure of various kinds of media e.g. Diesel, gasoline, water, engine oil, transmission oil or air. The sensor is available...

Knock Sensor with flying lead, Mounts with a M8 bolt. Uses the LK3 connector

225l/h @ 4bar in-tank pump - 38mm diameter body. This pump has been discontinued and has been replaced with F02U.454.100-01

* DISCONTINUED PRODUCT * The Bosch Motorsport ABS M4 Kit and other associated Bosch ABS M4 Kits have been discontinued. If you currently have a Bosch Motorsport ABS M4  Kit, we still can provide support, some parts, documentation, and end of line testing.If you're looking to update your...

Description Documentation • ABS Wheel Speed Sensor Interface • Lightweight Aluminum Housing • All Bosch Motorsport ABS systems are for competition use only and are NOT legal on public roads. Bosch Motorsport has developed a wheel speed module that converts the Bosch DF11 (differential dual...

Description Documentation Software Picture shows 991 Cup Kit • Plug & Play ABS M5 Kit for Porsche 997 Cup and 991.1 and 991.2 Cup • Tested and developed on racetracks like Spa and Nordschleife • Detailed installation instruction available at our website • 1...

Description Documentation Software Picture shows 991 Cup Kit • Plug & Play ABS M5 Kit for Porsche 996 and 997 Cup Cars • Tested and developed on racetracks like Spa and Nordschleife • Detailed installation instruction available at our website • 1 MBaud CAN...

WDD2 Preview Bosch Motorsport Wiper Direct Drive WDD2 A fully programmable, CAN/LIN-controlled wiper motor that replaces the motor, gearbox, and external linkage of a conventional wiper system with a single sealed housing. Overview What Is It A direct-reversing wiper motor with the electronics built...

*NEW OLD STOCK* The Bosch DDU 8 is a completely programmable full color 5" dashboard display (and 10 multi color gearshift lights on top) combined with the capabilities of the a C60 data logging system allowing for both engine data acquisition and visualization synchronized...

NOTE: PROJECTED AVAILABILITY IS END OF Q4. New from Bosch, the DDU 11 is a programmable full color dashboard display with a data logging system for motorsport applications. With a basic logging function of 100 channels (with a recording rate of 20 Hz - 50ms...

The EKP 14.5 Ultra High Flow Lift pump is a turbine pump for installation inside the fuel tank. It is capable of providing >150 l/h at 5.7 bar and 14 V. Bio-fuel can be delivered up to E80 (significantly shortens lifetime). Replaces discontinued 0...

This adaptor offers the opportunity to convert a rail pressure regulator into an inline pressure regulator.Aluminum housing to mount the Bosch Fuel Pressure Regulators from the FPR Mini 2, Mini 5 and Mini Range. Suitable for Gasoline, Methanol, and E85 fuels.Note: Regulator is purchased...

Description Documentation This single fire coil is a low cost concept, designed to get connected to the spark plug via a high voltage wire. The high voltage connector is specified according to the SAE standard. The performance of the coil fulfills the demands of...

Description Documentation This single fire coil is a low cost concept, designed to get connected to the spark plug via a high voltage wire. The high voltage connector is specified according to the European standard. The performance of the coil fulfills the demands of...

Description Documentation This single fire coil is a low cost concept designed to connect a high voltage wire on the coil. The coil has an integrated transistor and requires an ECU with internal ignition drivers.- Max. 33 kV- Max. 65 mJ- Connection for high voltage wire-...

Complete Replacement Camera and Radar Module for the CAS-M3 Collision Avoidance System. Includes Camera, Radar Sensor, Mounting Bracket and Harness.  Individual parts are available as well, please contact us for further details.

Description Documentation NOTE: We are now accepting deposits for CAS-M3 systems. There will be limited availability, and orders will be processed on a first come first serve basis. Deposits will be taken via ACH/Wire Transfer ONLY. To make a deposit, please contact us at sales@gomuchfaster.com...

Description Documentation • Thermocouple Type K • Thermo material: NiCr-Ni • Measurement range: -200 to 1,000°C (1,300°C) • Flexible mounting depth • Analog output (Thermo voltage) This sensor is designed to measure exhaust gas temperatures up to 1,300°C. Thermocouples are temperature sensors that supply...

Description Documentation • Wide measurement range: -55 to 300°C • Very short response time • Strong protection against ambient temperature • Robust design This sensor is designed to measure temperatures up to 300°C of oil, water, fuel or air. This signal is used as...