Products

1/2 Wave Dipole Antenna for Tire Watch TPMS Systems,

Description Documentation This version is intended for fuel flow sensors which have a very low trigger level. Heavy filtering minimizes the possibility of interference, resulting in significant variation of the trigger level with frequency. The Dual Magnetic Converter (DMC) converts magnetic style signals to...

Description Documentation This version is intended for engine trigger sensors that have insufficient amplitude to trigger a logic level input. Minimal filtering avoids delays in the signal. The trigger level does not vary significantly at normal operating frequencies. The Dual Magnetic Converter (DMC) converts...

Description Documentation This version is intended for ignition system input conditioners, typically used in drag racing, for measuring ignition timing. The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor...

Description Documentation This version is intended for magnetic wheel speed sensors. The signal should be symmetrical around zero volts. Heavy filtering minimizes the possibility of interference, resulting in significant variation of the trigger level with frequency. The Dual Magnetic Converter (DMC) converts magnetic style...

The AutoMeter MFDL display systems are designed specifically for the harshest environments. The carbon composite housing is IP67 sealed against water and dust intrusion and will easily withstand 20g of continuous vibration and 50g of shock. The analog pointer provides a quick and clear...

Description Documentation Specifications Electrical • Output current Continuous DC current 20 A (total) Peak surge current 500 A • Max. operating frequency 50 kHz @ 28 V • Switching delay, typical High to low 6.5 µsec Low to high 6.5 µsec • Input threshold,...

The Emergency Clutch Release is designed to work as a standalone installation to enable actuation of a vehicle clutch. It has been approved by FIA and ACO for use in LMP vehicles as an emergency neutral device capable of disconnecting vehicle drive-trains. The ECR...

Description Basic Specifications Logging • 16 MB standard logging memory (250 MB optional) • Logging rates up to 1000 samples per second • Fast Ethernet download Inputs • 10 x Analogue voltage inputs (24 optional) • 4 x Analogue temperature inputs (8 optional) •...

The 2 meter long Ethernet Panel Mount Cable is used for the motorsport team who needs a custom solution when building their own wiring harnesses. These ethernet communications cords can be used to communicate with a multitude of manufacturers including Bosch, MoTeC and more.

The EGT1000 Platinum Resistance Temperature Detector (PTRD) exhaust gas temperature sensor from AvioRace is built to withstand the extreme demands of the racing and motorsport industry. The EGT1000 can measure temps between -40°C and 1,000°C (+/- .9% accuracy to 900°C) and the output does...

Description Technical Data LDL TPMS Sensors can be configured to use with Beru F1 TPMS Systems. They can be ordered as direct replacement for the following F1 Beru Sensors: F1-100-1521-011 (25 mbar per bit version 1 Hz update rate)F1-100-1521-010  (14.7 mbar/bit version 1 Hz update...

This ADR ONLY suits FIA required series' (SRO). This does NOT work in IMSA. Features Configurable thresholds to trigger an event - password-protected feature Configurable thresholds to trigger the medical light output - password-protected feature Support for external medical and status lights CAN and GPS inputs...

Description Documentation • Absolute fluid pressure measurement • Measurement range 0 to 10 bar • Analog output This sensor is designed to measure absolute pressure of various kinds of media e.g. Diesel, gasoline, water, engine oil, transmission oil or air. The sensor is available...