MoTeC

Connector and pins to make your own wiring harness for various models of Motec ECU's. These are for the 26 way connectors on the M800/600/400 , M84, and Connector D on M1 Series ECUs.Backshells are used to provide a better surface to grip shrink boots...

Connector and pins to make your own wiring harness for various models of Motec M1 ECU Connector "B" Backshells are used to provide a better surface to grip shrink boots when creating your own wiring looms.  Raychem 202K153 (straight) or 222K153 (90 degree) boots are what...

Connector and pins to make your own wiring harness for your CDL3, C125, C127, C1212 Color Display as well as other M800/600/400 and M84 ECU Family, as well as Connector C on M1 Series ECU'sBackshells are used to provide a better surface to grip shrink...

Connector and pins to make your own wiring harness for Motec M1 Series ECU's Connector "A"Backshells are used to provide a better surface to grip shrink boots when creating your own wiring looms.  Raychem 202K163 (straight) or 222K163 (90 degree) boots are what fit the...

Description Features • Small, lightweight & compact package • Rugged design for use in extreme environments • Backlit customize graphical symbols available • Real time feedback via LED indicators above each button • Simplify wiring, only 4 wires required for multiple buttons • Short...

Description Features • Small, lightweight & compact package • Rugged design for use in extreme environments • Backlit customize graphical symbols available • Real time feedback via LED indicators above each button • Simplify wiring, only 4 wires required for multiple buttons • Short...

Description Provides additional input/output functionality consisting of: • 14 extra analog voltage inputs • 4 extra analog temperature inputs • 4 extra auxiliary outputs Unfortunately, we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer...

Description The code enables 250MB of logging memory for ADL3 or EDL3 displays. Log files can then be viewed in MoTeC's i2 software. Unfortunately, we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer to...

Description Provides access to advanced i2 Pro data analysis software with multiple graph overlays, X-Y plots, advanced maths functions, synchronized video (automatic alignment), and flexible layouts to accommodate virtually any user preference. Unfortunately, we are unable to issue codes to international customers due to...

Description Telemetry Enables transmission of live data from the vehicle to the pit where it can be viewed in real time using the MoTeC Telemetry Monitor software. Requires radio modems or other means of transmission. Remote Logging Enables converting telemetry data into a log...

Description Documentation Properly control boost with this solenoid connected to your ECU. Please Contact Us for further information. Documents Title Type 🗎 Datasheet PDF

Description Documentation Specifications Outputs • LED Indicating Power on Beacon signal received Error codes • Digital output for beacon information (alternative to CAN output) Communications • CAN bus used for: Communicating beacon information Communicating diagnostic information Configuring the receiver via the BR2 configuration software...

Description Documentation Specifications Outputs • Coded infra-red beam Range up to 40 meters (130 ft) when used with BR2 • 3 color LED status indicator for: Power OK Low battery Fault or very low battery Power • External via a 12 V rechargeble battery...

Description This 12v Color Bullet CCD Camera allows for a signal input into a color display for viewing live on screen imagery. Can be used as a reverse camera, and displayed under user derived conditions or via a driver operated switch. The C125, C127...

Basic Specifications Display • Screen: Color TFT LCD, anti-reflective • Selectable fixed layouts with channel and label configurability • 48 user-defined, scrollable message lines with programmable overrides • 3 programmable 'pages', for example Practice, Warm-Up, Race Communications • 2 x Configurable CAN buses with...

The C1212 Track Kit includes: • C1212 Display • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adapter • Ethernet Cable C1212 Track Kit Options • The C1212 will connect directly to the factory...

The C125 Accessory Kit includes: • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adaptor • Ethernet cable The C125/C127 Accessory Kit is a cost-effective, plug-in display solution based on our new full color...

Display • Screen: Colour TFT LCD, anti-reflective• Resolution: 800 x 480, anti-aliased graphics• Selectable fixed layouts with channel and label configurability• 48 user-defined, scrollable message lines with programmable overrides• 3 programmable 'pages', for example Practice, Warm-Up, Race Communications • 2 x Configurable CAN buses...

Basic Specifications Display • Screen: Colour TFT LCD, anti-reflective • Resolution: 800 x 480, anti-aliased graphics • Selectable fixed layouts with channel and label configurability • 48 user-defined, scrollable message lines with programmable overrides • 3 programmable 'pages', for example Practice, Warm-Up, Race Communications...

The C125 Track Kit includes: • C125 Display • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adapter • Ethernet Cable C125 Track Kit Options • The C125 will connect directly to the factory...

Now with up to 32 GB of logging via USB! The C125 is a popular model in MoTeC's range of color Displays and Display Loggers. Striking in design and powerful in functionality, the C125 offers display, data logging, auxiliary control and programmable LEDs all...

The C127 Track Kit includes: • C127 Display • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adapter • Ethernet Cable C127 Track Kit Options • The C127 will connect directly to the factory...

MoTeC is very excited to announce the release of our new Display Creator software. Display Creator is a unique graphics application for customizing screen designs on MoTeC’s color displays and loggers, namely the D series and C series. This incredibly flexible software allows customers...