Customer Favorites

Display • Screen: Colour TFT LCD, anti-reflective• Resolution: 800 x 480, anti-aliased graphics• Selectable fixed layouts with channel and label configurability• 48 user-defined, scrollable message lines with programmable overrides• 3 programmable 'pages', for example Practice, Warm-Up, Race Communications • 2 x Configurable CAN buses...

These units are drop in replacements for any current product. The exterior dimensions and connector types and pin-outs are identical. They are marked clearly as V3 units. They do require a new antenna for Multi GNSS capabilities, but can use pre-existing RaceGrade GPS antennas...

These units are drop in replacements for any current product. The exterior dimensions and connector types and pin-outs are identical. They are marked clearly as V3 units. They do require a new antenna for Multi GNSS capabilities, but can use pre-existing RaceGrade GPS antennas...

These units are drop in replacements for any current product. The exterior dimensions and connector types and pin-outs are identical. They are marked clearly as V3 units. They do require a new antenna for Multi GNSS capabilities, but can use pre-existing RaceGrade GPS antennas...

This adaptor offers the opportunity to convert a rail pressure regulator into an inline pressure regulator.Aluminum housing to mount the Bosch Fuel Pressure Regulators from the FPR Mini 2, Mini 5 and Mini Range. Suitable for Gasoline, Methanol, and E85 fuels.Note: Regulator is purchased...

This is a fully assembled power connector for the PBX90 Power Controller

Description Documentation • User-friendly interface • Customer-defined features feasible • Prepared for test automation • Favorable test setup, consuming low space • Simulation of typical automotive interfaces combined in one unit The new and modern hardware-in-the-loop test system µLC Test System is suitable for...

New old stock, brand new in a box, never used!These are non-backlight models with 8MB of standard logging memory. (Pro Logging can be purchased as an upgrade, please contact us for this option)The MoTeC sport dash logger is an excellent entry level logger that...

Description Documentation The STC (Serial to CAN) adaptor converts RS232 data to CAN and vice versa allowing multiple RS232 devices to be connected to a Data Logger via CAN. Please Contact Us for further information. Documents Title Type 🗎 Datasheet PDF

Description Documentation • Thermocouple Type K • Thermo material: NiCr-Ni • Measurement range: -200 to 1,000°C (1,300°C) • Flexible mounting depth • Analog output (Thermo voltage) This sensor is designed to measure exhaust gas temperatures up to 1,300°C. Thermocouples are temperature sensors that supply...

Description Documentation • Wide measurement range: -55 to 300°C • Very short response time • Strong protection against ambient temperature • Robust design This sensor is designed to measure temperatures up to 300°C of oil, water, fuel or air. This signal is used as...

12 Position switch for Bosch Data Loggers and ECU applications. These are built to specification, please indicate required lead length from 15-95cm when placing your order

This sensor is designed to measure temperatures up to 300°C of oil, water, fuel or air. This signal is used as a control value for engine control units or as a measurement value which is logged in a data acquisition system. The NTC-sensing element...

Description Documentation • Wide measurement range: -55 to 300°C • Very short response time • Strong protection against ambient temperature • Compact and robust design This sensor is designed to measure temperatures up to 300°C of oil, water, fuel or air. This signal is...

Full Logging Stage 2 Upgrade for DDU 8, DDU 9, DDU 10 Displays as well as C60 and C70 Loggers.This software enable code (entered using RaceCon while connected to the dash module) increases the logging memory by 1GB to the existing system memory. Note: Stage...

Full Logging Stage 1 Upgrade for DDU 8, DDU 9 and DDU 10 Displays/Loggers This software enable code (entered using RaceCon while connected to the dash module) increases the logging capability from 50Hz and 100 Channels, to 1080 channels at a maximum logging rate of...

metri-pack electrical connection, and an all stainless steel design that is compatible with all fluids, the MoTeC professional series of pressure sensors have the repeatability and accuracy needed for the most demanding environments. Additionally, these pressure sensors have a dash-3 female threaded input for easy adoption to any...

Description • Professional grade, military spec - built for maximum data integrity • Internal USB 3.0 memory stick • Mechanically latched with a keyway that easily locates into the mating connector - ideal for fast changeovers in locations that are difficult to see or...

Description Connecting to the PC's Serial Port Use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM). The PCI cable contains electronics in the ECU end of the cable to convert the ECU signals to signals compatible with the serial...

Description • Internal USB3 memory stick • Mechanically latched • Anodized housing • Resistant to water, vibration, and the elements This cable only fits the standard USB cable offered here. Please Contact Us for further information.