Customer Favorites

Description This kit suits the MoTeC M190 ECU. The kit includes all 3 connector kits required to wire to a MoTeC M190 ECU. • MS AS616-26SN • MS AS616-35SN • MS AS616-35SA Please Contact Us for further information.

Description Looking for a way to flush mount your new 8 button keypad? Here is your solution! Comes complete with countersunk bolts and nylock nuts. Just mount your keypad to this piece and mount that into your application! Simple as that! **Keypad not included**...

Description Looking for a way to flush mount your new 15 button keypad? Here is your solution! Comes complete with countersunk bolts and nylock nuts. Just mount your keypad to this piece and mount that into your application! Simple as that! **Keypad not included**...

Description This kit suits the MoTeC PDM16 and PDM16 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description This kit suits the MoTeC PDM32 and PDM32 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 7 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 8 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 12 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 22 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 24 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 23 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Replacement IMU for Bosch M5 ABS systems with 500kb/s CAN speed. This sensor is for ABS system only. MM510 sensors for general applications can be found here:ACCELERATION SENSOR MM5.10

Replacement IMU for Bosch M5 ABS systems with 1mb/s CAN speed. This sensor is for ABS system only. MM510 sensors for general applications can be found here: ACCELERATION SENSOR MM5.10

Description Documentation Software • 120 A continuous current • 36 outputs • 80 A high side switches • Easy programming of complex functions • Software-tool integrated The PowerBox is an intelligent control and distribution unit for the electric grid in a modern racing car...

PBX90 Primary Power Connector 8MM Stud for use with 35mm2 Wire

The 1 Antenna Receiver Control Unit (known as an RCU) is a system for real-time detection, monitoring and storage of tire pressure and temperature data. Consisting of multiple components (which can be ordered separately or as a kit) the auto racing version uses one RCU...

Description Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description The layout of each keypad is completely user-definable, so a standard set of 64 semi-transparent labels is available for users to affix to the backlit buttons as they choose. Please Contact Us for further information.

Description The L180 Enclosed Logger is a powerful control device and fully programmable data logger all in one compact unit. It comes standard with 250 MB internal memory and can be upgraded to USB Logging for additional data capacity and flexibility. The USB Logging...