Products

Description Documentation • Engine vibration measurements • Measurement range 3 to 25 kHz • Robust design • Compact housing This sensor is used for detecting structural born vibrations in spark ignition engines due to uncontrolled combustion. This sensor is suitable for operation in extreme...

The MoTeC L120 is a cost effective solution as a D Series Display Controller, as well as a CAN bus bridge. Additionally, these units have the ability to be upgraded with features such as a being used as a T2 Telemetry Box, or the...

The MoTeC L120 is a cost effective solution serving as a multi purpose solution with internal and USB logging already enabled - acting as a D Series Display Controller, as well as a CAN bus bridge. Additionally, these units have the ability to be...

Description The L180 Enclosed Logger is a powerful control device and fully programmable data logger all in one compact unit. It comes standard with 250 MB internal memory and can be upgraded to USB Logging for additional data capacity and flexibility. The USB Logging...

Harness end connector kit that mates to LSU 4.9 Lambda Sensors. Kit includes body, contacts and seals. Has a boot collar for Heat Shrink of Raychem -25 Boots. (202A11 or 202K111)

Lambda Sensor Connector Kit - Includes housing, pins and seals.

Description Documentation • Application: lambda 0.65 to ∞ • Wide-band • Exhaust gas temperature range (max.) for short time ≤ 1,030°C • Max. Hexagon temperature 600°C This sensor is designed to measure the proportion of oxygen in exhaust gases of automotive engines (gasoline or...

Description Documentation • Application: lambda 0.65 to ∞ • Wide-band • Exhaust gas temperature range (max.) for short time ≤ 1,030°C • Max. Hexagon temperature 700°C for a short time • Without trim resistance in the connector This O2 sensor is designed to measure...

Description Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

The LCU4 is able to control and read up to 4 different Bosch LSU4.9 Lambda sensors, providing outputs via CAN bus and is able to communicate with MoTeC protocols, on their ECU's and Dashboards. They can also be configured to be used in conjunction...

The LCU is able to control and read up to 4 different Bosch LSU4.9 Lambda sensors, providing outputs via CAN bus and is able to communicate withMoTeC protocols, on their ECU's and Dashboards. They can also be configured to be used in conjunction with...

Description Documentation The known for their lambda control in IC, the Lambdatronic LT2 from Bosch Motorsport, is a very compact unit that provides a controlled pumping current for two Bosch lambda sensors (LSU 4.2, LSU 4.9 or the Mini-LSU 4.9). All diagnostic data, sensor temperature...

Description Documentation Software The known for their lambda control in IC, the Lambdatronic LT4 from Bosch Motorsport, is a very compact unit that provides a controlled pumping current for up to four Bosch lambda sensors (LSU 4.2, LSU 4.9 or the Mini-LSU 4.9). All diagnostic data,...

Description Documentation Software • Supply of up to 4 Bosch lambda sensors, type LSU ADV • Integrated voltage compensation for sensor heater The Lambdatronic LT4 ADV is a control module which function is to supply and control up to four Bosch LSU ADV. The...

Complete Ligier Loom set for IMSA Weathertech championships-2023 Spec for use with XAP Display and Position Panels.  Note: This is a 4 week lead time product, please order accordingly.NOTICE: All wiring harness sales are final, as they are built to suit and are non-returnable/non-refundable. Please confirm...