Customer Favorites

The GCU800 is an extremely lightweight and compact transmission controller and logger. With a main body depth of just 11mm, the custom casing is CNC machined from billet aluminum and anodized for extra durability and protection. At only 150g, the GCU800 is one of the lightest...

Our solid state relay is available in both DT and DTP connections and comes in a protectively anodized, IP68 rated casing, for use in adverse conditions. It’s compact, easy to use and is most commonly used in conjunction with our compact compressors.

The ZD 200 series are tightly packaged pneumatic valve blocks featuring a built in pressure sensor and air filter. They are designed to be driven and controlled by an external GCU or an ECU with transmission control ability.For applications with electronic throttle control the...

The ZD179-1 valve block is a four port, two state design allowing a single air feed to be switched between two outlet ports with an exhaust to atmosphere. This can power both sides of a pneumatic actuator or switch air flow in turbo control...

The ZD160-1 valve block is designed to allow efficient and precise control over two sides of a wastegate diaphragm to maintain turbo boost control. The Shiftec bespoke control valves offer a rapid response time and high flow rate, giving greater control and accuracy than...

Shiftec Side Mount Throttle Blipper A compact, billet-machined nudger that blips the throttle on every downshift, for cars running a traditional cable throttle rather than drive-by-wire. Overview What Is It A mechanical throttle blipper for cable-throttle cars running a paddle shift system. Any paddle...

The two way paddle allows up and down shift demands to be made from a single lever with an easy push/pull action. It can be mounted either on the steering wheel or on a separate bracket from the steering column or dashboard and so...

Devised as a positive action shift paddle, the innovative Shiftec paddle design has remained unchanged since its introduction in 2006. The rugged paddle frame and lever are CNC machined from a high quality aluminum billet and black anodized for added protection under adverse conditions....

With it's main body constructed of high grade stainless steel (utilizing a M6x1 thread pitch), this NTC (Negative Temperature Coefficient) sensor from AvioRace is designed to provide a quick and highly accurate response to temperature change between -40°C to 250°C for either liquid or gas...

The M8x1 Air Temperature Sensor NTC (Negative Temperature Coefficient) from AvioRace is constructed of stainless steel for superior mechanical characteristics and thermal conductivity, and is designed to provide a rapid response to temperature change with a range of measurement between -40°C to 125°C. Click HERE to view the...

The Miniaturized Piezoresistive Pressure Transducer (linear) from AvioRace is perfect for any motorsport application such as chassis (brake, gearshift pressure) or engine (oil, water, fuel pressure). The core and body are manufacturer from high grade AISI 316 L stainless steel, making it highly resilient to ware...

The LCU is able to control and read up to 4 different Bosch LSU4.9 Lambda sensors, providing outputs via CAN bus and is able to communicate withMoTeC protocols, on their ECU's and Dashboards. They can also be configured to be used in conjunction with...

The LCU4 is able to control and read up to 4 different Bosch LSU4.9 Lambda sensors, providing outputs via CAN bus and is able to communicate with MoTeC protocols, on their ECU's and Dashboards. They can also be configured to be used in conjunction...

High performance and reliable linear potentiometers, Ideal for applications such as car suspensions, motorcycle forks and shock absorbers, brake pedals and many other applications. The sensors are based based on “conductive plastic” technology which will means consistent readings for a very long time. The...

High performance and reliable linear potentiometers, Ideal for applications such as car suspensions, motorcycle forks and shock absorbers, brake pedals and many other applications. The sensors are based based on “conductive plastic” technology which will means consistent readings for a very long time. The...

Designed and built by AvioRace, the IP64 rated miniaturized infrared temperature sensor was specifically designed for contact free tire temperature measurement. With a fully sealed, red anodized aluminum body, the sensor contains highly accurate elements built in to actively compensate the output signals, which are proportional...

The EGT1000 Platinum Resistance Temperature Detector (PTRD) exhaust gas temperature sensor from AvioRace is built to withstand the extreme demands of the racing and motorsport industry. The EGT1000 can measure temps between -40°C and 1,000°C (+/- .9% accuracy to 900°C) and the output does...

Hall Effect rotary sensor for motorsport application, no noise effect and high temperature stability. Typical application are angular position measurement of mechanical devices like throttle, pedal, etc..

The Tire Location Module TPMS provides teams a full TPMS auto-location system. As opposed to the standard Locator system, which goes off axle identification, the TLM system has the ability to automatically learn the wheel unit sensors fitted to the car, and start monitoring...

From LDL Technologies - Tire Watch (or Tyre Watch) presents their newest product for motorsport tire pressure monitoring systems - InfraRed (IR) Wheel Unit Sensors for motorsport TPMS.  Made out of high performance material to endure the centrifugal stress on the track. Its simple...

Deutsch Autosport 4AWG ASHD TerminalsSold Individually2AWG ASHD Socket Part Number - 611103-0252AWG ASHD Pin Part Number - 605660 Wire Range - 35mm/2AWGAmpacity - 200A

NOTE: PROJECTED AVAILABILITY IS END OF Q4. New from Bosch, the DDU 11 is a programmable full color dashboard display with a data logging system for motorsport applications. With a basic logging function of 100 channels (with a recording rate of 20 Hz - 50ms...

For teams wanting a spare VMPS thats part of the required scrutineering kit from Bosch for teams competing in GTD AM/Pro.Antenna kits are sold separately and can be purchased here.There is currently an extended lead time on these parts due to manufacturer delays. We...