Creative Motorsport Solutions

If you're searching for the best solution for a rearview motorsport camera and display system, that is budget minded - search no further. We have custom designed this system to not only meet the harsh demands of the motorsport industry, but surpass them.The rugged 7" IP67...

The high resolution bullet camera is a sealed IP67 rated unit, with an auto-iris, auto-white balance and Sony chipset allowing them to perform under varying sun & light conditions with true day and night modes. Additionally, we then add a high definition 120 degree lens to the camera...

90 Degree Camera Mount for Rear View Camera System

0 Degree Camera Mount for Rear View Camera System

This combination shift light and gear display module is user configurable using a simple  application to accept either analog or CAN inputs for:-Gear Position-RPM-Acknowledge switch for alarms-Day/Night mode for brightnessShift lights are configurable for color and trigger rpm by gear. Gear Display can display...

We developed this simple kit to make the installation of all Bosch ABS kits safe, easy and reliable. The Creative Motorsport Solutions Bosch ABS Mounting kit features a custom made aluminum mounting plate, which each mounting point for the 40A Pump, 25A Valves and...

Connector Kit to mate to the MM510 IMU sensor. Kit includes housing and 4 female contacts with seals

This kit will allow GPS lap timing in all Porsche 991.1 and 991.2 cup cars.  Using the Race Grade GPS from RaceGrade, and custom harness, this makes GPS integration into the car is very quick and easy. Lap timing is accomplished by updating the dash...

This kit will allow GPS lap timing in all Porsche 991.1 and 991.2 cup cars. This 20Hz version provides very fast and accurate GPS data, meaning lap times will be perfect every time. Using the Race Grade GPS from RaceGrade, and custom harness, this...

PCCNA PARTICIPANTS - PLEASE SELECT "FERRARI TRACKSIDE" to order your MSE box for track pickup. NOTE: These harness kits are NOT used in the Mustang Challenge. There is a separate harness for the Ford Mustang Challenge series that is still in development with Ford. Once...

This 75' cable connects the IMSA fuel level or fuel flow sensors mounted on the competitors Fuel Rig on pit lane. They connect the fuel rig to the pit side "Red Box" for monitoring. Every IMSA Weather Tech team must have one per fuel...

This series mandated antenna is for the yellow light system used for cars competing in the IMSA Michelin Pilot Championship "IMPC" series (GS/GT4 and TCR cars) and VP Racing Sportscar Challenge GSX - GT4.

For IMSA Weather Tech participants only. This loom adapts the current long fuel level sensor loom to work with the new fuel flow adapters attached to the pit side fuel rig.

Green LED to be mounted on the rear bumper area of all Weather Tech Championship cars. The light is terminated with a DTM04-2P connector with the following pin out. 1. Ground2. Power +12vTeams will need supply power via a DTM06-2S connector with the same...

The mating connector kit for the Bosch LWS Steering Angle Sensor. Kit includes connector body and 5 terminals.F02U.B00.656-01

Annual test and certification service for IMSA GTD/GTD Pro Bosch C60 Scrutineering Harnesses. F02U B0U 010 01 Return the loom to us here: Creative Motorsport Solutions USA LLC222 Oakridge Blvd. STE 120Daytona Beach FL 32118IMSA Loom Certification Turn around time is approximately 10 working days.

This Ethernet communication cable can be used to download all Bosch dash, logger and MS6 or later ECU’s. This is not for communicating with any ABS systems. For ABS systems a MSA-2 Cable is required which can be purchased here.  A rugged mil spec...

Installs and Removes Size 22D/M Pins (M39029/58-360) and Socket (M39029/56-348) Contacts For TE Connectivity (Deutsch Autosport) Autosport Connectors AS MICROLite HE ASL Pin Connector and Socket Connector Series and as well as the AS Series Connectors commonly used in the motorsport racing industry. Additionally,...

The 2 meter long Ethernet Panel Mount Cable is used for the motorsport team who needs a custom solution when building their own wiring harnesses. These ethernet communications cords can be used to communicate with a multitude of manufacturers including Bosch, MoTeC and more.

The CMS retractile cable (also known as the motorsport curly cord) is the benchmark item for steering wheel and other applications where the quality and durability of the cable is an absolute must. These cable are hand laid, then double jacketed and feature Raychem DR25...