Manufacturers

I/O Upgrade - This upgrade activates the L120 inputs and outputs. It allows the ability to: Wire sensors into the L120. Use 2 digital and 3 speed inputs. Use 4 auxiliary outputs. Unfortunately, we are unable to issue codes to international customers due to...

This code enables the 120MB of logging memory in the L120 turning it into an enclosed logger. Unfortunately, we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer to purchase this code. Please include an...

To ensure fair and balanced competition Apex one will be mandating the use of a spec Motec logger system for all GT3 cars.Motec L120 Data Logger (M L120) with the following enabled:120MB Logging Enabled (M L120 120 MB)Analog Inputs Enabled (M L120 IO)Also included...

LMP3 VPRC CAN and Power interface for MyLaps Driver ID Integration

BMW G82 M4GT4 SRO/Emotag Logger Interface Adapter cable

Cable USB Logging 1.5m - Panel Mount This is a purpose built cable that cannot be substituted with an off-the-shelf alternative. Compatible storage devices: Economy 32GB Samsung USB 3.0 Flash Drive Mid-Level 32GB MoTeC USB Data Plug  Compatible logging devices: C125 USB Display Loggers...

Two transponder options are available for the Porsche Carrera Cup North America or Lamborghini Super Trofeo. A TR2 with a 1 year subscription, or a lifetime subscription. These are the only two classes where a 1 year subscription is an available option.  The TR2 Direct...

SRO Racelink CAN Cable for BMW M4GT4. Required for 2025 competition in GT4 America and GT4 World Challenge. This cable provides a CAN link to the RaceLink system.

Deutsch Autosport AS 10 Shell Pin Connectors offer: Two contact arrangements35 - 13 #22 Pins98 - 6 #20 PinsAnd all keyway options are available. Please select the appropriate pin style connector. Choose: Connector Type Contact Arrangement Keyway (Please note, only the same color keyways will...

LMP3 VPRC XAP Position in Class LED Panel wiring kit. Includes the cockpit harnesses to connect power and the X2 transponder and LPC panel driver module as well as the rear loom to connect the panels.  Harness parts can be purchased separately, please contact...

*NEW OLD STOCK* The Bosch DDU 8 is a completely programmable full color 5" dashboard display (and 10 multi color gearshift lights on top) combined with the capabilities of the a C60 data logging system allowing for both engine data acquisition and visualization synchronized...

The IRN4C infrared tire temperature sensor reads four channels of data, with a maximum operating temperature of 200°C, and can function over a distance of up to 950mm. This allows for mounting on either the leading edge of the side pod or the wing...

The IRN4C infrared tire temperature sensor reads four channels of data, with a maximum operating temperature of 200°C, and can function over a distance of up to 950mm. This allows for mounting on either the leading edge of the side pod or the wing...

High accuracy pitot and temperature sensor with built-in electronics delivering an output signal of 0 to 5 V. Variable tube height from 130 to 300 mm with optional static pressure port. Air temperature measurement range from -40 to +150°C, Accuracy ± 0.25% FS and a...

High accuracy pitot and temperature sensor with built-in electronics delivering an output signal of 0 to 5 V. Variable tube height from 130 to 300 mm with optional static pressure port. Air temperature measurement range from -40 to +150°C, Accuracy ± 0.25% FS and a...

High accuracy Pitot tube sensor with built-in electronics delivering an output signal of 0 to 5 V. This pitot tube sensor is used for measuring air speed by integrating dynamic and static pressures. This measurement combined with load measurement (please refer to our document “Strain...

The PI-6 from Texense is a high accuracy pitot tube sensor that is used for measuring air speed by integrating dynamic and static pressures with built-in electronics delivering an output signal of 0 to 5 V. The 6mm pitot tube sensor is made from...

With its compact dimensions and characteristics, the Texense TS-1/8 NPT enables our customers to check the fluid temperature of many different applications. Range                   -50 to +150°C Supply voltage      5 to 16 V Supply current...

With its compact dimensions and characteristics, the Texense TS-M6 enables our customers to check the fluid temperature of many different applications. Range                    -50 to +150°C Supply voltage      5 to 16 V Supply current  ...

With its compact dimensions and characteristics, the Texense TS-M6 enables our customers to check the fluid temperature of many different applications. Range                    -50 to +150°C Supply voltage      5 to 16 V Supply current  ...