motec

Description Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description This kit suits the MoTeC M190 ECU. The kit includes all 3 connector kits required to wire to a MoTeC M190 ECU. • MS AS616-26SN • MS AS616-35SN • MS AS616-35SA Please Contact Us for further information.

Description • Internal USB3 memory stick • Mechanically latched • Anodized housing • Resistant to water, vibration, and the elements This cable only fits the standard USB cable offered here. Please Contact Us for further information.

This code enables the 120MB of logging memory in the L120 turning it into an enclosed logger. Unfortunately, we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer to purchase this code. Please include an...

I/O Upgrade - This upgrade activates the L120 inputs and outputs. It allows the ability to: Wire sensors into the L120. Use 2 digital and 3 speed inputs. Use 4 auxiliary outputs. Unfortunately, we are unable to issue codes to international customers due to...

To ensure fair and balanced competition Apex one will be mandating the use of a spec Motec logger system for all GT3 cars.Motec L120 Data Logger (M L120) with the following enabled:120MB Logging Enabled (M L120 120 MB)Analog Inputs Enabled (M L120 IO)Also included...

metri-pack electrical connection, and an all stainless steel design that is compatible with all fluids, the MoTeC professional series of pressure sensors have the repeatability and accuracy needed for the most demanding environments. Additionally, these pressure sensors have a dash-3 female threaded input for easy adoption to any...

Cable USB Logging 1.5m - Panel Mount This is a purpose built cable that cannot be substituted with an off-the-shelf alternative. Compatible storage devices: Economy 32GB Samsung USB 3.0 Flash Drive Mid-Level 32GB MoTeC USB Data Plug  Compatible logging devices: C125 USB Display Loggers...

Description Connecting to the PC's Serial Port Use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM). The PCI cable contains electronics in the ECU end of the cable to convert the ECU signals to signals compatible with the serial...

Description This kit suits the MoTeC PDM16 and PDM16 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 22 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description This kit suits the MoTeC PDM32 and PDM32 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 24 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 23 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 7 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 8 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 12 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description • Professional grade, military spec - built for maximum data integrity • Internal USB 3.0 memory stick • Mechanically latched with a keyway that easily locates into the mating connector - ideal for fast changeovers in locations that are difficult to see or...

Description Looking for a way to flush mount your new 15 button keypad? Here is your solution! Comes complete with countersunk bolts and nylock nuts. Just mount your keypad to this piece and mount that into your application! Simple as that! **Keypad not included**...