MOTEC
MoTeC has been an industry leader since the 1980's for the design and manufacturing of motorsport engine management and data acquisition, as well as motorsport electronics, connectors, sensors and wiring. Whether you need a MoTeC Dash Display / Data Logger, a motorsport video system, or power distribution module - we can get you taken care of! Please note - currently all MoTeC products are built to order and we are experiencing longer than usual lead times, and we greatly appreciate your patience!
-
Serial to CAN (STC)Vendor: MoTeCDescription Documentation The STC (Serial to CAN) adaptor converts RS232 data to CAN and vice versa allowing multiple RS232 devices to be connected to a Data Logger via CAN. Please Contact Us for further information. Documents Title Type 🗎 Datasheet PDF
- $245.00
- $245.00
- Unit price
- per
-
Pro-Level 32GB USB 3.0 Autosport Data PlugVendor: MoTeCDescription • Professional grade, military spec - built for maximum data integrity • Internal USB 3.0 memory stick • Mechanically latched with a keyway that easily locates into the mating connector - ideal for fast changeovers in locations that are difficult to see or...
- $335.50
- $335.50
- Unit price
- per
-
PCI Cable, 2mVendor: MoTeCDescription Connecting to the PC's Serial Port Use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM). The PCI cable contains electronics in the ECU end of the cable to convert the ECU signals to signals compatible with the serial...
- $223.00
- $223.00
- Unit price
- per
-
BTX Beacon TransmitterVendor: MoTeCDescription Documentation Specifications Outputs • Coded infra-red beam Range up to 40 meters (130 ft) when used with BR2 • 3 color LED status indicator for: Power OK Low battery Fault or very low battery Power • External via a 12 V rechargeble battery...
- $790.00
- $790.00
- Unit price
- per
-
BR2 Beacon ReceiverVendor: MoTeCDescription Documentation Specifications Outputs • LED Indicating Power on Beacon signal received Error codes • Digital output for beacon information (alternative to CAN output) Communications • CAN bus used for: Communicating beacon information Communicating diagnostic information Configuring the receiver via the BR2 configuration software...
- $694.00
- $694.00
- Unit price
- per
-
Mid-Level 32GB USB 3.0 Data PlugVendor: MoTeCDescription • Internal USB3 memory stick • Mechanically latched • Anodized housing • Resistant to water, vibration, and the elements This cable only fits the standard USB cable offered here. Please Contact Us for further information.
- $160.00
- $160.00
- Unit price
- per
-
M190 Connector KitVendor: MoTeCDescription This kit suits the MoTeC M190 ECU. The kit includes all 3 connector kits required to wire to a MoTeC M190 ECU. • MS AS616-26SN • MS AS616-35SN • MS AS616-35SA Please Contact Us for further information.
- $459.00
- $459.00
- Unit price
- per
-
Dual Half BridgeVendor: MoTeCDescription Documentation Specifications Electrical • Output current Continuous DC current 20 A (total) Peak surge current 500 A • Max. operating frequency 50 kHz @ 28 V • Switching delay, typical High to low 6.5 µsec Low to high 6.5 µsec • Input threshold,...
- $482.00
- $482.00
- Unit price
- per
-
DMC-D Converter: Wheel SpeedVendor: MoTeCDescription Documentation This version is intended for magnetic wheel speed sensors. The signal should be symmetrical around zero volts. Heavy filtering minimizes the possibility of interference, resulting in significant variation of the trigger level with frequency. The Dual Magnetic Converter (DMC) converts magnetic style...
- $116.00
- $116.00
- Unit price
- per
-
DMC-C Converter: Ignition SystemVendor: MoTeCDescription Documentation This version is intended for ignition system input conditioners, typically used in drag racing, for measuring ignition timing. The Dual Magnetic Converter (DMC) converts magnetic style signals to open collector output signals – a square wave. This makes a typical magnetic sensor...
- $116.00
- $116.00
- Unit price
- per
-
DMC-B Converter: Engine Trigger SensorVendor: MoTeCDescription Documentation This version is intended for engine trigger sensors that have insufficient amplitude to trigger a logic level input. Minimal filtering avoids delays in the signal. The trigger level does not vary significantly at normal operating frequencies. The Dual Magnetic Converter (DMC) converts...
- $116.00
- $116.00
- Unit price
- per
-
DMC-A Converter: Fuel Flow SensorVendor: MoTeCDescription Documentation This version is intended for fuel flow sensors which have a very low trigger level. Heavy filtering minimizes the possibility of interference, resulting in significant variation of the trigger level with frequency. The Dual Magnetic Converter (DMC) converts magnetic style signals to...
- $116.00
- $116.00
- Unit price
- per
-
CIM ModuleVendor: MoTeCDescription Documentation Applicable MoTeC products • M4 with serial number less than 3000 • M48 • M8 The CIM module is normally installed in the vehicle. This places the electronics in the vehicle rather than in the cable which has the advantage of providing...
- $175.00
- $175.00
- Unit price
- per
-
Boost Control SolenoidVendor: MoTeCDescription Documentation Properly control boost with this solenoid connected to your ECU. Please Contact Us for further information. Documents Title Type 🗎 Datasheet PDF
- $70.00
- $70.00
- Unit price
- per
-
Lambda to CAN (LTC)Vendor: MoTeCDescription Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
- $465.00
- $465.00
- Unit price
- per
-
Lambda to CAN (LTC-NTK)Vendor: MoTeCDescription Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
- $395.00
- $395.00
- Unit price
- per
-
Lambda to CAN (LTCD)Vendor: MoTeCDescription Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
- $595.00
- $595.00
- Unit price
- per
-
Lambda to CAN (LTCD-NTK)Vendor: MoTeCDescription Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...
- $595.00
- $595.00
- Unit price
- per
-
Bullet Camera (12V)Vendor: MoTeCDescription This 12v Color Bullet CCD Camera allows for a signal input into a color display for viewing live on screen imagery. Can be used as a reverse camera, and displayed under user derived conditions or via a driver operated switch. The C125, C127...
- $295.00
- $295.00
- Unit price
- per
-
Keypad Label SheetsVendor: MoTeCDescription The layout of each keypad is completely user-definable, so a standard set of 64 semi-transparent labels is available for users to affix to the backlit buttons as they choose. Please Contact Us for further information.
- $60.00
- $60.00
- Unit price
- per
