Products

This ADR and CAN expansion loom is required for all LMP2 competitors. Current lead time is 6 weeks.

Description Connecting to the PC's Serial Port Use either a PC Interface cable (PCI cable) or a Computer Interface Module (CIM). The PCI cable contains electronics in the ECU end of the cable to convert the ECU signals to signals compatible with the serial...

Description This kit suits the MoTeC PDM16 and PDM16 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 22 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description This kit suits the MoTeC PDM32 and PDM32 Marine units. The kit includes: AS616-26SN - Autosport 26 socket plug kit which contains the connector, (26) size 20 female terminals (38943-20), extractor, and red shell keyway. ASHD614-1SN-S25 - Autosport heavy duty 1 pin 4AWG...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 24 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 23 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

The PI-6 from Texense is a high accuracy pitot tube sensor that is used for measuring air speed by integrating dynamic and static pressures with built-in electronics delivering an output signal of 0 to 5 V. The 6mm pitot tube sensor is made from...

High accuracy Pitot tube sensor with built-in electronics delivering an output signal of 0 to 5 V. This pitot tube sensor is used for measuring air speed by integrating dynamic and static pressures. This measurement combined with load measurement (please refer to our document “Strain...

High accuracy pitot and temperature sensor with built-in electronics delivering an output signal of 0 to 5 V. Variable tube height from 130 to 300 mm with optional static pressure port. Air temperature measurement range from -40 to +150°C, Accuracy ± 0.25% FS and a...

High accuracy pitot and temperature sensor with built-in electronics delivering an output signal of 0 to 5 V. Variable tube height from 130 to 300 mm with optional static pressure port. Air temperature measurement range from -40 to +150°C, Accuracy ± 0.25% FS and a...

The ZD 200 series are tightly packaged pneumatic valve blocks featuring a built in pressure sensor and air filter. They are designed to be driven and controlled by an external GCU or an ECU with transmission control ability.For applications with electronic throttle control the...

Adapter used to adapt the manufacturer supplied logger adapter to the IMSA XAP logger system in Porsche 718 Cayman GT4 cars. Note: This part is required for 2025 competition.

This kit will allow GPS lap timing in all Porsche 991.1 and 991.2 cup cars.  Using the Race Grade GPS from RaceGrade, and custom harness, this makes GPS integration into the car is very quick and easy. Lap timing is accomplished by updating the dash...

This kit will allow GPS lap timing in all Porsche 991.1 and 991.2 cup cars. This 20Hz version provides very fast and accurate GPS data, meaning lap times will be perfect every time. Using the Race Grade GPS from RaceGrade, and custom harness, this...

This is a direct replacement for all Porsche 997 cup cars. It features the same autosport hermetic connector to seal at the tank bulkhead, and terminals for the 4 lift pumps and the the fuel level sender. All parts are fuel safe and the...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 7 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 16 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Basic Specifications Outputs • 8 x 20 A outputs—20 A continuous, 115 A transient (typical) • 8 x 8 A outputs—8 A continuous, 60 A transient (typical) Inputs • 12 x Switch inputs Communications • 1 x CAN Diagnostic Information • Output current...

Description Documentation Software • 120 A continuous current • 36 outputs • 80 A high side switches • Easy programming of complex functions • Software-tool integrated The PowerBox is an intelligent control and distribution unit for the electric grid in a modern racing car...

Description Documentation Stack’s iconic pre-configured dash displays have been trusted by racers for decades to monitor the most critical racing engine parameters, replacing the typical stand-alone gauges (Tachometer, Oil Pressure, Oil Temperature, Water Temperature, Fuel Pressure, and Voltmeter) with a waterproof, compact, lightweight, and...