Products

Designed and built by AvioRace, the IP64 rated miniaturized infrared temperature sensor was specifically designed for contact free brake disc temperature measurement. With a fully sealed, red anodized aluminum body, the sensor contains three highly accurate elements built in to actively compensate the output signals,...

Designed and built by AvioRace, the IP64 rated miniaturized infrared temperature sensor was specifically designed for contact free tire temperature measurement. With a fully sealed, red anodized aluminum body, the sensor contains highly accurate elements built in to actively compensate the output signals, which are proportional...

Designed and built by AvioRace, the IP64 rated miniaturized infrared temperature sensor was designed to measure temperature, contact free, at a distance (20-400mm) contact free tire temperature measurement. The fully sealed, red anodized high grade aluminum body contains 64 points (4 rows x 16 columns) where the IR temp sensor...

Description The layout of each keypad is completely user-definable, so a standard set of 64 semi-transparent labels is available for users to affix to the backlit buttons as they choose. Please Contact Us for further information.

Knock Sensor with flying lead, Mounts with a M8 bolt. Uses the LK3 connector

Direct mount knock sensor. Uses a M8 Bold and LK2 connector

Description Documentation • Engine vibration measurements • Measurement range 3 to 25 kHz • Robust design • Integrated series connector This sensor is used for detecting structural born vibrations in spark ignition engines due to uncontrolled combustion. This sensor is suitable for operation in...

Description Documentation • Engine vibration measurements • Measurement range 3 to 25 kHz • Robust design This sensor is used for detecting structural born vibrations in spark ignition engines due to uncontrolled combustion. This sensor is suitable for operation in extreme conditions. Due to...

Description Documentation • Engine vibration measurements • Measurement range 3 to 25 kHz • Robust design • Compact housing This sensor is used for detecting structural born vibrations in spark ignition engines due to uncontrolled combustion. This sensor is suitable for operation in extreme...

The MoTeC L120 is a cost effective solution as a D Series Display Controller, as well as a CAN bus bridge. Additionally, these units have the ability to be upgraded with features such as a being used as a T2 Telemetry Box, or the...

The MoTeC L120 is a cost effective solution serving as a multi purpose solution with internal and USB logging already enabled - acting as a D Series Display Controller, as well as a CAN bus bridge. Additionally, these units have the ability to be...

Description The L180 Enclosed Logger is a powerful control device and fully programmable data logger all in one compact unit. It comes standard with 250 MB internal memory and can be upgraded to USB Logging for additional data capacity and flexibility. The USB Logging...

Harness end connector kit that mates to LSU 4.9 Lambda Sensors. Kit includes body, contacts and seals. Has a boot collar for Heat Shrink of Raychem -25 Boots. (202A11 or 202K111)

Lambda Sensor Connector Kit - Includes housing, pins and seals.

Description Documentation • Application: lambda 0.65 to ∞ • Wide-band • Exhaust gas temperature range (max.) for short time ≤ 1,030°C • Max. Hexagon temperature 600°C This sensor is designed to measure the proportion of oxygen in exhaust gases of automotive engines (gasoline or...

Description Documentation • Application: lambda 0.65 to ∞ • Wide-band • Exhaust gas temperature range (max.) for short time ≤ 1,030°C • Max. Hexagon temperature 700°C for a short time • Without trim resistance in the connector This O2 sensor is designed to measure...

Description Specifications Inputs/Outputs • 1 x Bosch LSU 4.9 Lambda sensor • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 1 x NTK Lambda sensor (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x Bosch LSU 4.9 Lambda sensor) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

Description Specifications Inputs/Outputs • 2 x NTK Lambda sensors (MoTeC #57007) • Power supply voltage 11 V – 16 V • Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to...

The LCU4 is able to control and read up to 4 different Bosch LSU4.9 Lambda sensors, providing outputs via CAN bus and is able to communicate with MoTeC protocols, on their ECU's and Dashboards. They can also be configured to be used in conjunction...