All Products

This upgrade activates additional C185 inputs: • 10 additional analog voltage inputs. • 4 additional analog temperature inputs. Unfortunately, we are unable to issue codes to international customers due to territory restrictions. Please refer to your local dealer to purchase this code. Please include...

This code enables the USB port in the C125, C127 or C1212 allowing you to use a USB stick to add memory capacity to your display. Unfortunately, we are unable to issue codes to international customers due to territory restrictions. Please refer to your...

Telemetry Enables transmission of live data from the vehicle to the pit where it can be viewed in real time using the MoTeC Telemetry Monitor software. Requires radio modems or other means of transmission. Remote Logging Enables converting telemetry data into a log file...

Description Documentation Specifications Outputs • Coded infra-red beam Range up to 40 meters (130 ft) when used with BR2 • 3 color LED status indicator for: Power OK Low battery Fault or very low battery Power • External via a 12 V rechargeble battery...

Description Documentation Specifications Outputs • LED Indicating Power on Beacon signal received Error codes • Digital output for beacon information (alternative to CAN output) Communications • CAN bus used for: Communicating beacon information Communicating diagnostic information Configuring the receiver via the BR2 configuration software...

Description Documentation Applicable MoTeC products • M4 with serial number less than 3000 • M48 • M8 The CIM module is normally installed in the vehicle. This places the electronics in the vehicle rather than in the cable which has the advantage of providing...

Description This 12v Color Bullet CCD Camera allows for a signal input into a color display for viewing live on screen imagery. Can be used as a reverse camera, and displayed under user derived conditions or via a driver operated switch. The C125, C127...

The CDL3 Accessory Kit includes: • SLM-C Club Shift Light Module • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labeled, with plug-in power adaptor • Ethernet cable • For those wishing to expand their CDL3 Accessory Kit,...

The C125 Accessory Kit includes: • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adaptor • Ethernet cable The C125/C127 Accessory Kit is a cost-effective, plug-in display solution based on our new full color...

Description The CDL3 Track Logging Kit includes: • CDL3 Club Dash Logger • 12 I/O enabled • 8MB logging memory enabled • SLM-C Club Shift Light Module • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labeled, with...

The C1212 Track Kit includes: • C1212 Display • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adapter • Ethernet Cable C1212 Track Kit Options • The C1212 will connect directly to the factory...

The C127 Track Kit includes: • C127 Display • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adapter • Ethernet Cable C127 Track Kit Options • The C127 will connect directly to the factory...

The C125 Track Kit includes: • C125 Display • 10 Hz GPS • Two buttons, pre-wired • Professional quality plug-in loom, terminated and labelled, with plug-in power adapter • Ethernet Cable C125 Track Kit Options • The C125 will connect directly to the factory...

  The Club Dash Logger is a fully configurable backlit display, controller and logging device. It offers the same quality and advanced technology as our top of the line systems, with a package of features tailored to suit entry level motorsport requirements such as...

Basic Specifications Display • Screen: Color TFT LCD, anti-reflective • Selectable fixed layouts with channel and label configurability • 48 user-defined, scrollable message lines with programmable overrides • 3 programmable 'pages', for example Practice, Warm-Up, Race Communications • 4 x Configurable CAN buses with...

Now with up to 32GB of USB logging, the C187 from MoTeC is their newest display logger for the professional level of motorsports. The ultra bright, and anti-reflective full color 7" LCD screen is readable even in direct sunlight. The C187 comes standard with 250MB of internal...

Basic Specifications Display • Screen: Color TFT LCD, anti-reflective • Resolution: 800 x 480, anti-aliased graphics • Selectable fixed layouts with channel and label configurability • 48 user-defined, scrollable message lines with programmable overrides • 3 programmable 'pages', for example Practice, Warm-Up, Race Communications...

Basic Specifications Display • Screen: Color TFT LCD, anti-reflective • Selectable fixed layouts with channel and label configurability • 48 user-defined, scrollable message lines with programmable overrides • 3 programmable 'pages', for example Practice, Warm-Up, Race Communications • 2 x Configurable CAN buses with...

Basic Specifications Display • Screen: Colour TFT LCD, anti-reflective • Resolution: 800 x 480, anti-aliased graphics • Selectable fixed layouts with channel and label configurability • 48 user-defined, scrollable message lines with programmable overrides • 3 programmable 'pages', for example Practice, Warm-Up, Race Communications...

Description Documentation • Compact, lightweight housing in a low-profile design with high-density packaging • Robust 4 mm standard jacks for measuring leads • Signal integrity of high-speed data links ensured by product-specific version • No more lost jumpers due to patented 90° rotatable connectors...