Manufacturers

The IMSA required mounting plate for the X2 Pro Transponder.

IMSA Safety Light Antenna Kit for the following cars that have the Black MSE ICars Safety Light Track Condition Radio This antenna kit is to be used in conjunction with an MSE Box for all cars competing in Weathertech series and LMP3's in VPX.

IMSA 1 Bar Pressure Sensor for Airbox, manifold pressure in NA cars and restrictor pressure.  

This Ethernet communication cable can be used to download all Bosch dash, logger and MS6 or later ECU’s. This is not for communicating with any ABS systems. For ABS systems a MSA-2 Cable is required which can be purchased here.  A rugged mil spec...

Tire Watch software can be downloaded here. Within each version of software there is a RS232 driver and the tire watch software, install the RS232 Driver before connecting to the module for the first time. VERY IMPORTANT: Disconnect the car connection to the RCU...

Adapter used to adapt the manufacturer supplied logger adapter to the IMSA XAP logger system in Porsche 718 Cayman GT4 cars. Note: This part is required for 2025 competition.

MYLAPS TR2 Transponder - Just released from MYLAPS, and replacing the X2 Direct Power Transponder, the TR2 Transponder is one of the most state of the art transponders on the market. Used in all levels of motorsport such as SCCA, NASA, SRO; as well...

The XAP LED Position Panel (also known as the Leader Light Panel) for IMSA Competition. Kit includes the LED Driver box, 2x LED panels and optional 2x 3 meter extensions to connect the panels to the module.Can Communication - 1 x 2.0b not terminated Can...

Replacement IMSA Yellow LED Warning Light used in all IMSA safety light kits.

IMSA 3.5 bar Boost pressure sensor for forced induction cars in the Weather Tech Championship.

Bosch Compact 6-Way Female Connector Kit, currently only available in the Code 1 configuration. Most commonly sold as individual pieces, we've included all the required parts in one kit to make life easy for the installation of a Bosch Throttle Body.Code 1 kit includes:1x -...

Description Technical Data LDL TPMS Sensors can be configured to use with Beru F1 TPMS Systems. They can be ordered as direct replacement for the following F1 Beru Sensors: F1-100-1521-011 (25 mbar per bit version 1 Hz update rate)F1-100-1521-010  (14.7 mbar/bit version 1 Hz update...

The PSS is specially designed to measure absolute pressure in gasoline direct injection applications. This sensor is also compatible with other kind of fluids e.g. Diesel, engine oil, transmission oil or brake fluid. The sensor uses a thin layer technique to achieve high accuracy...

Description Specifications Performance • 10 Hz update rate • 66 satellite channels • Dynamics 4 G • Power supply voltage 4.0 - 6.0 V Communications • RS232 • 38400 Baud rate Compatible with • MoTeC C125, C185 • MoTeC ACL • MoTeC ADL3, ADL2 (not compatible with original...

Mating connector kit for Bosch Motorsport MS6 series ECU 91pin. Includes housing and terminals

Mating connector kit for Bosch Motorsport MS6 series ECU 105pin. Includes housing and terminals.

The IMSA Team Alert Safety Light System (TASL for short) can be used (but are not required) in conjunction with the IMSA Safety Light System across all IMSA series. Easy mounted on the timing stand/pit box with the supplied mounting bracket, the three lights provide a 360 degree...

Green LED to be mounted on the rear bumper area of all Weather Tech Championship cars. The light is terminated with a DTM04-2P connector with the following pin out. 1. Ground2. Power +12vTeams will need supply power via a DTM06-2S connector with the same...

Mounting Plate for the Bosch MM510 IMU.  This damping plate has  special vibration absorbing/temperature stable urethane pads that reduce unwanted high frequency vibrations from affecting the devices measurements. It has 2 X M8 mounting bungs for mounting the plate to the car, as well...

Connector Kit for Bosch Direct Drive Wiper Motor Note: Lin and Analog drives use the same connector