IMSA Cup System

Stack is able to offer a complete system for Porsche IMSA cup that utilizes the CAN data
stream from the Porsche/Bosch Motorsport ECU and will log up to 45 channels of information by connecting 1 Plug. 

Installation of one of these systems can be completed in less then 1 hour and can provide detailed  information about the driver and car. 

Examples of some of the channels that are available when using the ECU interface:
Wheel Speed
Engine Speed
Throttle Position
Lateral G
Longitudinal G
Oil Temperature
Water Temperature
Gear
Lambda
Lambda Control
Warnings From the ECU
* Fuel Pressure and Oil Pressure may require additional sensors from Stack depending on your car's configuration

Creative Motorsports, working with Autometrics Motorsports, has developed a precut anodized mounting system for all cup cars that allows a very easy and clean mounting position for the ST625 Display system, which is an option for any IMSA Cup system.

See the Photo's of this mounting system and a sample installation by clicking here

IMSA Cup Bosch ECU Package Includes:
Bosch Gateway Module
ST8952 Logging Module (20 Channels of Recording, 50Hz Sampling rate)
G Sensor
Lap Timing System
DataPro Version 3 Software for Windows 2000/XP
Brake On/Off connection Cable
USB PC Cable (no parallel port required, much faster than serial connections)
Looms and installation instructions
$4999.00

Optional Upgrades:
-ST8995 Display Package: Includes ST625 Display System, all required looms and switches $1235.00
-Predictive Lap Timing Upgrade for ST8995 Display Systems $760*
*This price includes a ST8999 PLT upgrade combined with a ST690 Hall Effect wheel speed sensor. In testing, we have found that a high resolution wheel speed signal is critical for the Predictive Lap Timing System to function properly, this is provided by the ST670.
-Custom Bracket for Display System Installation for GT3 Cup Cars $150 See photo's of installation here
-Steering Sensor-Linear Potentiometer for direct mounting to Steering Rack $250.00
-Brake Pressure Sensor $450
-Extra Fluid Pressure Sensor $87 or Solid State Sensor $170 (faster, higher accuracy and resolution)
-All Systems are compatible with Stack's range of video systems

Systems can also be installed that do not utilize the Bosch ECU information but can provide a very powerful Driver analysis and development. These will require more installation and preparation time, and can be upgraded to connect to the Bosch ECU at any point.

IMSA CUP Package (No Bosch Interface Module) Includes:
ST8952 Logging Module (20 Channels of Recording, 50Hz Sampling rate)
G Sensor
Wheel Speed Sensor
Lap Timing System
Throttle Position Sensor
Steering Position Sensor
Brake On/Off connection Cable
DataPro Version 3 Software for Windows 2000/XP
USB PC Cable (no parallel port required, much faster than serial connections)
Looms and installation instructions
$3999.00

Optional Upgrades:
-ST8995 Display Package: Includes ST625 Display System, all required looms and switches $1235.00
-Predictive Lap Timing Upgrade for ST8995 Display Systems $760*
*This price includes a ST8999 PLT upgrade combined with a ST690 Hall Effect wheel speed sensor. In testing, we have found that a high resolution wheel speed signal is critical for the Predictive Lap Timing System to function properly, this is provided by the ST670.
-Custom Bracket for Display System Installation for GT3 Cup Cars $150 See photo's of installation here
-Brake Pressure Sensor $450
-Extra Fluid Pressure Sensor $87 or Solid State Sensor $170 (faster, higher accuracy and resolution)
-All Systems are compatible with Stack's range of video systems

If you are interested in systems for advanced analysis for suspension and aero, please contact us and we will help you to find the system that will suit your specific application.